Brooks locomotive plans
I am attempting to build a 1908 (+ or -) Brooks 4-6-0 locomotive for the Parker Tube Float, in Parker, Arizona. It was used on the local railroads here in the early 1900's
I would like to know if you have any web sites or know where I can find detailed plans in which I can use to build the locomotive. What I have scaled out so far is one approximately 10 feet long and about 4 foot tall but I need more accurate scales and diagrams to make it as authentic as possible. I would like better pictures that what I have and would be awesome if I could get detailed spec sheets showing the actual dimensions including front, rear, side, and top views. ...
—Ted Martin, Lake Havasu City, AZ
posted from CPRR Discussion Group at 7:47 PM
2 Comments:
From: kylewyatt@aol.com
A number of locomotive drawings are available.
I suspect you are looking for a loco that passed thorugh the Santa Fe, and the above site probably doesn't have it. It does have erecting drawings for SP class T-31, a 4-6-0.
I'd imagine building a early 20th century 4-6-0 might run around $2 million, based on some recent much smaller and earlier locos.
—Kyle Wyatt
From: Bob_Spude@nps.gov
You probably have seen David Myrick's book Santa Fe to Phoenix which includes information on the Arizona & California RR with photos of those Brooks 4-6-0s. Since this is for a float, I assume the accuracy can be a little more relaxed than if you were building a replica. So, I'd suggest you look at the 4-6-0 drawings in Linn Westcott's, Steam Locomotives Cyclopedia – it has plenty of detail. If you don't have it in the Parker library, then maybe you can find a used copy online for under $20.
Sounds like a fun project. Good luck
—Bob
Bob Spude – Historian – Cultural Resources Management – National Park
Service – Intermountain Region – 505.988.6770 Voice – 505.988.6876 Fax
The National Park Service cares for special places saved by the American people so that all may experience our heritage.
Post a Comment
<< Recent Messages